Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in St. George, NY
We provide independent Lennox air duct cleaning across St. George, NY, and the one thing that sets our Lennox work here apart is this: most of the Lennox air handlers in this neighborhood were added to houses that were never built for ductwork. That changes how a system fails and how it needs to be cleaned. St. George is Staten Island’s oldest waterfront neighborhood, and its early-1900s houses and walk-ups carry ducts that were retrofitted long after the fact. Our technicians have up to 15 years of experience reading exactly that setup. Call (877) 938-5572 for a free estimate.
Why St. George Residents Choose Us for Lennox Service
We’re an independent Lennox service provider, which means we work on this equipment regularly and we know how it behaves when it’s bolted into an old house. That’s the difference from a generic duct cleaner who shows up with a shop vac and a coupon. We use professional-grade equipment from Rotobrush and Nikro, plus Abatement Technologies air filtration to capture what we dislodge instead of recirculating it through your rooms.
Our familiarity runs across the Lennox gas furnaces and air handlers you’ll find in St. George retrofits, and we fit quality parts that match. Scheduling is straightforward: the local pro is licensed and insured as their state requires, the price is set per system by a written estimate agreed before work starts, and you get before-and-after photos of your own ducts. That’s how you verify the job was done. Call (877) 938-5572. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in St. George
Lennox equipment fails in predictable ways here, and most of those ways trace back to damp basements and retrofit ductwork rather than the equipment itself. Five we see:
- Biological growth on the cased coil face and drain pan. Lennox CBX27 and CBX32 cased coils sitting in damp St. George basements collect growth on the coil face and pan, and that growth feeds musty odors straight back through the return. Coil cleaning and treatment is the fix, not replacement.
- Short, flex-heavy return plenums that sag or collapse. Because the return plenum was tacked onto a Lennox air handler during a retrofit, it’s often undersized. It starves the blower and pulls basement silt and harbor-humidity moisture into the cabinet.
- Leaking cabinet seams at undersized plenum transitions. Lennox Merit and Elite furnace cabinets bolted to undersized transitions leak at the seams, so conditioned air escapes into basement spaces where storm flood silt has already settled in the ductwork.
- Separated joints on extended supply trunks. Original Lennox sheet-metal supply trunks in 1900s-1930s St. George homes were often extended with flex later. Joints separate and let humid St. George harbor air and mold spores enter the supply side.
- Duct runs that are simply too short and irregular to move air. When ducts were retrofit into plaster-walled houses, runs end up undersized and flex-heavy, so the equipment runs longer and dirt accumulates faster.
Lennox Service in St. George: What Local Conditions Mean for Your Equipment
Here’s the local reality that no inland Staten Island neighborhood shares with St. George: the Victorian-era basements along the waterfront flood during nor’easters and storm surges, and a lot of Lennox air handlers sit right in those basements. When water pushes in, silt and mold get driven directly into the return-side ductwork. That isn’t a standard cleaning situation. A standard cleaning pulls dust off the inside of a duct. Silt that’s been carried in by floodwater settles into the flex runs and the bottom of the plenum, and it dries into a film that the blower keeps pulling back up. We video-inspect those short flex-heavy returns before we quote, so the estimate reflects what’s actually inside them. If your Lennox cabinet sits in a St. George basement that has taken on water, a full-system cleaning is what gets the silt out. Call (877) 938-5572.
Lennox Models & Products We Service in St. George
We service the Lennox equipment that ends up in St. George retrofits: Merit Series ML180 and ML195 gas furnaces with matching air handlers, Elite Series EL180 and EL195 furnaces and EL-series air handlers, the Dave Lennox Signature Collection SLP98V variable-capacity furnace, and CBX27 and CBX32 cased evaporator coils paired with Merit and Elite systems. We favor genuine Lennox OEM coils, gaskets, and cabinet components where the part affects airflow or sealing, and quality aftermarket flex, mastic, and insulation where the brand adds no value. We’re independent; we repair, install and service Lennox equipment with quality parts that fit it. Call (877) 938-5572 for an estimate.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in St. George
Pricing is set per job by the written estimate, and the estimate is free. What we look at before we quote: whether the Lennox coil sits in a damp basement, whether the return plenum is undersized, how much of the supply trunk is original sheet metal versus later flex, and whether past storm water left silt in the runs. That’s why we don’t price per vent. We don’t quote a per-vent figure or a teaser coupon, because that’s how the industry’s bait-and-switch reputation started.
| Service | Typical cost in St. George |
|---|---|
| Full-system duct cleaning | Quoted per system by written estimate |
| Evaporator coil cleaning | Quoted per coil by written estimate |
| Duct sealing | Quoted per run by written estimate |
For an exact quote on your system, call (877) 938-5572 – estimates are free.
Serving St. George, NY – Our Local Coverage Area
We serve St. George and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in St. George
Yes. When floodwater pushes into a St. George basement where a Lennox air handler sits, silt gets driven into the return-side ductwork and settles as a film that a standard cleaning won’t lift. The job needs a full-system cleaning with containment filtration, plus a coil inspection. Call (877) 938-5572 for an exact quote – estimates are free.
St. George’s humid summer air and harbor proximity push indoor humidity up, especially in basements and first-floor ducts, so biological growth on the Lennox cased coil face and drain pan becomes active in the warm months. In cooler weather the same growth goes dormant and the smell fades. Coil cleaning and treatment addresses the source. Call (877) 938-5572 for an estimate.
In most cases, yes. We clean the CBX-series cased coil and drain pan directly, and we don’t replace a coil that’s sound. Replacement is only warranted when the cabinet or coil is corroded beyond cleaning. The local pro is licensed and insured as their state requires, and the written estimate sets the price.
Because the ductwork was retrofit after the fact, the runs are often undersized and flex-heavy, which starves the blower and leaves upper floors short on air. The fix is usually duct sealing and repair, not new equipment. Cleaning plus sealing closes the separated joints that leak humid harbor air into the supply side. Call (877) 938-5572 for an estimate.
No. Genuine Lennox OEM parts matter where airflow or sealing is affected, like coils, gaskets, and cabinet components. For flex, mastic, and insulation, quality aftermarket material works fine. We choose parts on fit and function, not branding. Call (877) 938-5572 for an exact quote.
Service Areas Near St. George
We also serve the surrounding neighborhoods, including Stapleton, Rosebank, Bay Ridge, Dyker Heights, and Sunset Park. All of them share the harbor-humidity and older-housing patterns that shape Lennox work here. If your ducts sit in a damp basement, the same coil-and-plenum issues apply.
Book Your Lennox Service in St. George Today
For Lennox air duct cleaning in St. George, coil cleaning, or duct sealing, call (877) 938-5572. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, you’ll get a written price before work starts, and before-and-after photos when it’s done. Learn more about our Lennox service.
Written by the team at Air Duct Cleaning Bay Ridge.